ArmorGarage

We purchased their product for our 1152 square feet family shop a little over a year ago. My husband and my 3 sons and their friends use the shop to service personal vehicles, our tractor, and to work on project cars. We've had several car engines removed and replaced using a steel wheel engine hoist, we've had hot steel splatter from an acetylene torch, and we've had several different chemicals spilled on it and we've had no failures in the product. We followed the prep instructions carefully because there were several oil spills to remove prior to application. We are building a new house and we will definitely put this product on our garage floor.

Online information and reviews - excellent. Unfortunately phone call was below average versus the very positive online reviews- appeared not interested in answering questions and as if they wanted off the phone. Suggest when that busy send customers to voicemail or hire a friendly intern to filter messages.

A lot of information. Quick links for color selection with actual pictures of garage applications would be great.

Clear information easy to navigate and make purchase. Even during the COVID-19 crisis someone answered the phone and got my shipment out the door. It was delivered 2 days after I called to check the status because of the COVID-19 crisis. I am impressed with the company and their product. In this case you get what you pay for. Thanks I will be ordering more, as I have a large roof!!

I spent alot of money to paint my 2 car garage floor. I followed instructions exactly how they wanted. Topcoat started to peel a year later now my garage looks so bad. I should have left it bare concrete. Good luck if you buy it, don't say you wasn't warned. So frustrating I spent all that money for it to peel up. I will be more than happy to provide more info and Pic if needed.

The product and install data on the website was second to none. They offer more instructions and help for the DIY installer than any other site I saw. The garage epoxy product is also of great quality. If you don't mind doing the prep work involved, anyone can make there floor look fantastic.

Great information (maybe to much), but the product is as advertised and shipped quickly. Would be ultra helpful to have picture of each color-chip combination listed.

All good so far. We have applied the first later so far and it was pretty easy. We look for long term success with these products.

The website is wonderful and full of great information. Called the company and spoke to Ed, which was a great help in clearing up a few loose ends in my project.

When I first decided to coat my floor, I had questions and your site provided way more advice, guidance, and honest "truths" about what to expect and what you must do to ensure a positive outcome then I imagined.
I have compared the big box store cheaper coatings and your site helped me understand that if I am committed to spending money to coat my floor, why waste time and money on a product that will fail in a few years. As the saying goes "do it right the first time"...

Great epoxy but the sealer sucks when it's wet. I can't tell you how many times we've fallen on it in the last 8 months. From my wife, to my 3 year old to myself. We spent $1500 for the kit and non slip coating, first time it got wet we were ice skating so they told me I needed a different non-slip sealer, another $200 + later put that down and it's no better than the first sealer, contacted Armor Garage and now they are telling me if i buy a third type of non-slip coating for another $560 it "should" be non-slip. Sorry guys but i thought you would have stepped up to the plate to make it right since the first 2 times i did what you recommended and it didn't fix the problem. Good for you for getting my money but seeing how I've worked in auto shops for the last 20 plus years and continue to do so I'll be sure to pass the word along on just how happy i am!

This is the best i have for proof or purchase:

Joe, looking back at your original order it seems you did approx 850 s/f. For that square footage you'll need
2 gallons of Top Coat and 2 Qt's of the Aluminum Oxide. Retail is $235.00 per gal (top coat) and $45.00 each
Per qt of (non slip) $560.00. That said, I will discount it for you to $460.00 delivered.

Sales
ArmorGarage LLC
*******979

Very thorough on product knowledge, especially on procedures. With all the different products they offer, it can get confusing and overwhelming on which product suits your needs. They delve into details and instructions on how to choose the application that suits you without pointing you to product you don't need. Will do follow up when product arrives and is applied...so far so good!

Hard to navigate, not mobile friendly. Would love to see more detailed photos and videos of the application of the product.

Called and got very helpful information when on line ordering. They called back in 5 minutes with an answer.

I called in to ask about product specs. They were super helpful in making sure I'm selecting the correct product!

Your website is extremely difficult to work with-to match colors and to view sample photos.Hope you update it soon. Can't wait to try your product!

entry fileds are too dark to see text written. had to highlight the entries to verify correct information

I bought my brand new car there and every time, EVERY TIME, doesn't matter if it's a tire rotation and oil change or a car inspection or getting snow tires on or anything else, I am here for HOURS. It shouldn't be like this. Will never buy another car from them again. They think I have hours to sit around while they take their time doing something so simple as swapping out tires. I make an appointment for everything and yet 4 hours later I am still here. They give zero care that you sit there for hours. Will buy from another place next time I need a car. Absolutely ridiculous!

Thanks to you for making my work easier. And to https://www.sitejabber.com/ for the chance. I know that this will be a complete success.

This was promoted as a lifetime product. After the first year it was already peeling. I sent 4 emails, called multiple times to complain and was consistently told to send pictures. I sent them each time with no reply. Now, it is year 3, and big strips of the pain is peeling off. I spent close to $1000 for the paint and had to find a special person to put it on, it was a nightmare. I would have gotten more bang for my buck with the regular deck paint.

Do not buy.

I was Recommended of your product by my son-in-law I'm hope he's correct with the quality of this product

I am very frustrated for how much information is on the website I would have hoped I could reference the part #'s on the product sent me but I have no idea which can of product does what so I can't even start my project.

Also frustrated with how many of my cans showed signs of leaking.

The website has a lot of good information. However when attempting to look at the epoxy color chips, the web page won't expand large enough to read the color codes. Also, when reviewing my order prior to executing my purchase, I did not see the comments section where I described the color chips that I wanted for my epoxy floor covering. In the floor color section, Red Tile is said to have "Custom Flakes" that can be noted in the comments. I'm assuming that the order taker reviews the notes/comment section, however, it would just be nice to see that information in the "Review Order" section of our purchase.

I found it to be very Informative and helpful with the information that was provided and would recommend it to friends and family